Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard.
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard. So, here's the answer. Put lowered spindles on your bug or bus and it will ride like it did stock. The bug spindles come with a 2 1/2" drop and the bus with a 3 1/2" drop. On the king and link bug spindles you can get spindles only or have us install the king and link pins. Those of you with 66, 67 bugs will have to change the outer tie rod end to 68 and later. On the bus spindles they only come with the king pins rebuilt. Also on the bus spindles you will need a tie rod with ends from a 1968-1979 (part number 211 415 801F). This is necessary to give more frame clearance. These spindes are cast not welded. Sold in pairs and some on an exchange basis.
Bug (Type 1): -65
Ghia: -65
No customer reviews for the moment.
Part #: 26010615
Empi Gasser, 5x112, 15x5.5"
Application:Part #: 211707136B
These brackets hold the bumpers on.
Application:Part #: 153863402
This is a full carpet kit.
Application:Part #: 6863110AL
These won't warp when they get wet and mud washes off easily..
Application:Part #: 111998159
Wiper Shaft, 2 pin, Left
Application:Part #: 111198057A
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 113255292AAL
The heater hose goes from the fan shroud to the heater boxes.
Application:Part #: 111199102
This nut came on all dual relief cases.
Application:Part #: 151847352C
These are wedge to seal the coners on the front door and quarter windows, where the metal frames meet the scrapers.
Application:Part #: 1129306050
These are some of the most common jets used.
Application:Part #: 211837475
The front door window rolls up and down between two rubber seals. This is the inner one.
Application:Part #: 113845521JCL
This seal is for the rear window.
Application:Part #: 2513001
KYB's are the best selling monotube replacement shock in the U.S.A..
Application:Part #: 111101401B02
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 025251147D
These are some of the pipes that connect the exhaust system to the muffler..
Application:Part #: 6801106
Chromoly Tall Seat Mounting Tab, radiused for 1 1/2" tubing
Application: