Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the short pieces that fit under the big cylinder tin towards the crank pulley.
These are the short pieces that fit under the big cylinder tin towards the crank pulley. They hold the large cylinder tins in place as well as deflecting air down and around the #2 and #4 cylinders.
Bug (Type 1): 1500-1600
Bus (Type 2): 1500-1600
Ghia: 1500-1600
Thing (Type 5): 1500-1600
No customer reviews for the moment.
Part #: 043119351B
Heater Channel Tin Left
Application:Part #: 1119025BKS
Super Shroud, Dog house oil cooler style, with heater ducts, black
Application:Part #: 1119352BK
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 1119517CH
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1119303CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119516CH
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1119526CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119025BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119533CH
This tin goes behind the crank pulley.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 1119027BK
This small fan shroud came on the 36hp motor.
Application:Part #: 1119517BK
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1119527CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119533BK
This tin goes behind the crank pulley.
Application:Part #: 1119526BK
This tin goes from one piece of cylinder tin to the other.
Application:
These are the short pieces that fit under the big cylinder tin towards the crank pulley.
