Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a great kit, because it allows you to adjust the shift rod not only side to side but also in and out.
This is a great kit, because it allows you to adjust the shift rod not only side to side but also in and out. It uses the round style coupler. Welding is required.
Race/Off-Road: All
No customer reviews for the moment.
Part #: 113885553
These are the stops that the back of the rear seat rests on.
Application:Part #: 111905271A
36 HP Distributor Vacuum Advance Unit
Application:Part #: 211837605
Vent Window Assembly, Left
Application:Part #: 1955113
This is used to drop the voltage on wiper motors when changing the car from 6v to 12v.
Application:Part #: 1405315A
Type 1 2.5" Drop Spindles for 5/205 Disc Brakes Link Pin Front End
Application:Part #: 022101361C
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1905250
This chrome clamp holds the distributor in time, as well as holding it onto the case.
Application:Part #: 6501205SW
These plates are .250" thick, that means they can handle the abuse of off roading.
Application:Part #: 043131599A
This is a smog device.
Application:Part #: 1070276K
Stainless Steel Bug (Type 1) Roof Rack (Knockdown Style)
Application:Part #: 1837639
This aftermarket lock secures your vent wing and helps prevent it from being opened.
Application:Part #: 311109335
These tubes go from the case to the heads to house the push rods.
Application:Part #: 1405310A
Lowered Spindles - K&L spindle only for drum brakes (pr)
Application:Part #: N141389
Convertible Top Latch Screw (2 Required)
Application:Part #: 1101462KIT
This kit has the correct nuts and washers to hold the heads on the engine..
Application:Part #: 211809190
Louver Repair Section fits both sides
Application:
This is a great kit, because it allows you to adjust the shift rod not only side to side but also in and out.
