Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Billet Univ Tach Mount Bracket for 1.5" Tubing
Billet Univ Tach Mount Bracket for 1.5" Tubing
Offroad/Race: All
No customer reviews for the moment.
Part #: 6115468
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: 111101123
These pins position the main bearings in the case halves so you can line up the oil galley holes with the main bearings.
Application:Part #: 211498041ABR
Kits contain the pins, bearings and shims which attach the spindle on king and link front ends to the axle beam.
Application:Part #: 113101475B
These are good bolt on valve covers. Black in Color
Application:Part #: 113415813D
These are the ball joints on the tie rods.
Application:Part #: 151837497
These are wedge to seal the coners on the front door and quarter windows, where the metal frames meet the scrapers.
Application:Part #: 111809931
Fuel Filler Door Spring
Application:Part #: 1119528CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 111127511A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 111945096N
This assembly comes with the bulb holder and lens.
Application:Part #: 6798074
SS Roller Pedal Cable Bracket
Application:Part #: 1115467HO
This is a breather box that will give excess "blow by" a place to go.
Application:Part #: 1109618
Dual Spring Shims, .015" 8 piece
Application:Part #: 1119516CH
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 6905811
If you want a keyed ignition switch for you buggy or tube car, here you go.
Application:Part #: 311405641B
These are the inner bearing seals on the drums or rotors.
Application:
Billet Univ Tach Mount Bracket for 1.5" Tubing
