Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These bearings go in the drum or rotor hub to allow them to spin.
These bearings go in the drum or rotor hub to allow them to spin. Make sure you pack the bearings well before installing. When installing outer races make sure you do not scar the surface the bearing rides on. It is a good idea to buy seals at this time. Note: Tightening of wheel bearings is explained under FRONT DRUM & ROTOR.
No customer reviews for the moment.
Part #: 241853345
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: 113863701K
These rubber mats go on the front and rear floors.
Application:Part #: 151847351B
These are wedge to seal the coners on the front door and quarter windows, where the metal frames meet the scrapers.
Application:Part #: 171881595A
These are the cables that release the back of the seats.
Application:Part #: 2847102WH
This makes the rear window pop out like the front windows.
Application:Part #: 111837476B
The front door window rolls up and down between these two rubber seals.
Application:Part #: 175867199
Arm rest Expanding Nut
Application:Part #: 04016
These are the parts found in the distributor.
Application:Part #: 021903655B
Boot for Alternator Cooling
Application:Part #: 211919033
Fuel Gauge, 12 volt, bulb and holder sold separately
Application:Part #: 113201621
This is the packing that goes around the gas tank opening, sealing off air and dirt from entering the trunk.
Application:Part #: 111823345
Hood Stay Bolt (2 required) also used for hood hinge pivot bolt in various years (62-77 standard) (71-72 super)
Application:Part #: 1805057
This tray mounts behind the rear seat.
Application:Part #: 1805052KIT
This tray mounts behind the rear seat.
Application:Part #: 111711349
Emergency Brake Adjustment Nut
Application:
These bearings go in the drum or rotor hub to allow them to spin.
