Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This screen fits in the sump around the pick up tube.
This screen fits in the sump around the pick up tube. It's more of a rock catcher than anything else. We recommend an external filter in conjunction with the screen. Used screens are fine as long as they are clean.
Bug (Type 1): 70-79
Bus (Type 2): 70-71
Type 3: 70-73
Ghia: 70-74
Thing: 73-74
Race/Off-Road: 70-79
No customer reviews for the moment.
Part #: 113115175
This screen fits in the sump around the pick up tube.
Application:Part #: JC22210
Jaycee Billet Oil Cap with Breater #8 AN Fitting, Red
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117107
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: JC22270
Jaycee Billet Oil Cap with Breater -10 AN Fitting, Blue
Application:Part #: 1117110
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:Part #: N121051
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1117103ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1115183RD
This plate is made out of a solid piece of aluminum. Red
Application:Part #: 021117151A
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 111115475A
Oil Filler Seal, 25-36 HP
Application:Part #: 1115456
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1117012
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 311115107HD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115141
This oil pump cover comes with a threaded boss.
Application:Part #: 1115485CH
A stock cap that has been chromed for looks..
Application:
This screen fits in the sump around the pick up tube.
