Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These bearings go in the drum or rotor hub to allow them to spin.
These bearings go in the drum or rotor hub to allow them to spin. Make sure you pack the bearings well before installing. When installing outer races make sure you do not scar the surface the bearing rides on. It is a good idea to buy seals at this time. Note: Tightening of wheel bearings is explained under FRONT DRUM & ROTOR.
No customer reviews for the moment.
Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 155885665
These are the parts needed to hold the back of the rear seat up.
Application:Part #: 1401021DL
This is a brand new axle beam with adjusters already installed.
Application:Part #: 311721555C
This cable operates the carburetor(s).
Application:Part #: 001301209
Nose Cone Bushing, Front, Late
Application:Part #: 211703073A
Body repair pieces for front panels.
Application:Part #: 2847491HSK
These kits are designed to replace the straight slide supports on Bus front and small rear safari windows.
Application:Part #: 1115450PL
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase.
Application:Part #: 6711150A
This box is made so you can weld it to a piece of 1 1/2" tubing and mount it to your shifter.
Application:Part #: 113251163F
Tail pipes route the exhaust out of the back of the stock muffler..
Application:Part #: GR15XCO
Core Charge Generators supply the battery with voltage. Rebuilt
Application:Part #: 311609537E
These shoes or linings are in the rear drums and are new, so no exchange.
Application:Part #: 111863411
This carpets the area behind the rear seat.
Application:Part #: 111251241A
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:
These bearings go in the drum or rotor hub to allow them to spin.