Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the shells that go in the rods and ride on the crank.
These are the shells that go in the rods and ride on the crank.
No customer reviews for the moment.
Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 1105271
If your are going to run a 69mm or a 78 mm counterweighted crank, then you will want to have your flywheel 8 doweled or get a flywheel has been 8 doweled.
Application:Part #: 021105291
Endplay Shim .40mm
Application:Part #: JC86050
Jaycee Billet 7" Crank Pulley for Street Cars, Black
Application:Part #: 211105271CRC
These flywheels have been reconditioned and are sold on an exchange basis. This is a rare flywheel so I do not have any in stock. You will need to send in yours first and we can recondition it.
Application:Part #: 1105277
Here are some flywheel pins that give you more contact surface on the flywheel.
Application:Part #: 021105281
Endplay Shim .30mm
Application:Part #: 111105259
The bolt and washer that holds the crankshaft pulley on.
Application:Part #: 111105701A
These are the shells that go in the rods and ride on the crank.
Application:Part #: 113105249
This key holds the oil deflector in place as well as aligns the front pulley.
Application:Part #: 113105231B
This gear matches up with the brass gear that is on the crank.
Application:Part #: 039105701BR
These are the shells that go in the rods and ride on the crank.
Application:Part #: 113105277
These pins hold the flywheel in place on the crankshaft.
Application:Part #: 311105101F
New 1600 Crankshaft
Application:Part #: 111105313A
It's really a bolt, but that's what everybody calls it.
Application:Part #: 02110529124
Endplay Shim .24mm
Application:
These are the shells that go in the rods and ride on the crank.