Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the shells that go in the rods and ride on the crank.
These are the shells that go in the rods and ride on the crank.
No customer reviews for the moment.
Part #: 111105213
This key goes into the crank to align the steel cam gear with the brass distributor drive gear.
Application:Part #: 1105271
If your are going to run a 69mm or a 78 mm counterweighted crank, then you will want to have your flywheel 8 doweled or get a flywheel has been 8 doweled.
Application:Part #: 111105305E
It's really a bolt, but that's what everybody calls it.
Application:Part #: 1105259
This is a chrome stock bolt and washer that holds the crankshaft pulley on.
Application:Part #: 1105251ALBK
Aluminum Stock Crankshaft Pulley Black
Application:Part #: 111198455
Main Bearings, 25-36 HP
Application:Part #: 025198461
The crankshaft rides in the main bearing.
Application:Part #: 113105241A
This is a large concave washer that goes on the crank after you have the nose bearing on.
Application:Part #: 1105305R
This is a large thrust surfaced gland nut made out of chromoly.
Application:Part #: 1105401A
These connecting rods are longer than stock.
Application:Part #: JC86040
Jaycee Billet 7" Crank Pulley for Street Cars, Red
Application:Part #: 1105169
These cranks are made from stock German core cranks.
Application:Part #: 111105707A
Rod Bearings .10
Application:Part #: 039105701BR
These are the shells that go in the rods and ride on the crank.
Application:Part #: 113105701
These are the shells that go in the rods and ride on the crank.
Application:Part #: 1105278
Here are some flywheel pins that give you more contact surface on the flywheel.
Application:
These are the shells that go in the rods and ride on the crank.
