Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:We only carry metric hose.
We only carry metric hose. This type of hose has cloth wrapped around it. We see more engine fires from people running an American-sized fuel hose than for any other reason. The cloth on the outside of the hose is supposed to make the hose tighter as it swells. If you run an American-sized fuel hose, even with a clamp, it will swell and come off. Hoses are sold by the foot.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1903532
This is just a cover that fits around a 30amp generator to give it that chrome look.
Application:Part #: 211813356GWW
Rear Lower Corner, Right, from bottom to beltline
Application:Part #: 211711182
This bushing wraps around the front shift rod.
Application:Part #: 241898002
These polished replacement kits are designed to fit the original contour molding profile.
Application:Part #: 151863123
These are the interior panels.
Application:Part #: 111831421DO2
These pins are in the door hinges. They are a real pain to get out, but we've found an air hammer works the best. Sometimes that doesn't even work, so have a case of penetrating oil on hand. It's better to repair the door hinges before you paint the car. The plug is a good idea to have as well, they easily plug into the top of the hinge pin.
Application:Part #: 181405371C
These joints are located in the ends of the control arms.
Application:Part #: 211843703H
Cargo Door Handle
Application:Part #: 361845321ACL
These are the seals for the side of a Type 3.
Application:Part #: 211945351A
This plastic bulb holder fits on the side in the rear..
Application:Part #: 113847139
This is the plate the cover goes over
Application:Part #: 112920330
30mm Main Venturi for 40IDF or HPMX
Application:Bug (Type 1); IDF
Bus (Type 2); IDF
Type 3; IDF
KG; IDF
Thing; IDF
Off Road; IDF
Part #: 688110A
Lowback Roadster Style Seats, Black Vinyl with Polished Vent Grommets
Application:Part #: 1903141
This chrome strap holds the alternator or generator to the stand.
Application:Part #: 111883401
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 211129615E
This rubber hose goes from the air cleaner to the carburetor.
Application: