Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This air filter is made to protect the crankcase.
This air filter is made to protect the crankcase. Air that builds up in the case is let out of the filter, while keeping dirt from entering the case. Remember dirt can be damaging and shortens the life of your motor. We use a hose to connect the air filter to the tube coming out of the oil filler. The hose should go around the fan shroud on the number #1-2 side and through the tin, so that the filter is next to the heater box. We prefer this setup to running oily air down the carburetor(s)on street cars. On off road cars we run a hose up high above the engine.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1115485CH
A stock cap that has been chromed for looks..
Application:Part #: 1115120
Melling Oil Pump for 8mm Studs with Flat Cam Gear
Application:Part #: 111115451
This rubber collar goes around the dump tube that comes from the generator stand.
Application:Part #: 1115455
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1115611
Chrome dipsticks come in different lengths and styles..
Application:Part #: 111115175
Oil Screen 25HP engines thru 1 677 687
Application:Part #: 111115487
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1117109
This block off plate is made to loop the oil back into the case in place of the stock oil cooler.
Application:Part #: 113115175
This screen fits in the sump around the pick up tube.
Application:Part #: 1117103ALM
These fittings are used for the stainless steel hose.
Application:Part #: JC22960
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Blue
Application:Part #: 1117023FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:Part #: 1115450BC
Replacement Oil Cap Billet Polished
Application:Part #: 1115457BK
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Black
Application:Part #: 1115142HD
This oil pump cover comes with a threaded boss.
Application:
This air filter is made to protect the crankcase.
