Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Valve seats are used in the big valve heads.
Valve seats are used in the big valve heads. So if you have big valve heads and need to replace the valve seats, this is what you will need. If you are planning on building your own big valve heads, we suggest you price out all the part first, complete heads are usually cheaper.
Bug (Type 1): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1101355
Here's another long subject, but it'll give you a little something to think about.
Application:Part #: 311198069FM
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers. MAHLE
Application:Part #: 311198169A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: N154011
These nuts and washers hold the heads on.
Application:Part #: 315198163A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1101477
These covers look good but have a tendency to leak.
Application:Part #: 1101472
If you like clip on valve covers these are the best that we have seen.
Application:Part #: 1198090A
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 311101353ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1101372
40 HP Barrel Shims .020 (4)
Application:Part #: 1107430
There are two types of keepers we like to use.
Application:Part #: 1101482
These covers look good but have a tendency to leak.
Application:Part #: 1198161
These rings are cast iron.
Application:Part #: 043101457
These nuts and washers hold the heads on.
Application:Part #: 1101474
These covers look good but have a tendency to leak.
Application:Part #: 311198169B92
Piston Ring Set 92mm
Application:
Valve seats are used in the big valve heads.
