Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
If you are converting a single port engine to a dual port or if you have a brand new case; these are the head studs you're looking for.
If you are converting a single port engine to a dual port or if you have a brand new case; these are the head studs you're looking for. We prefer using 10mm studs over the 8mm studs, because 10mm will hold it's torque, whereas the 8mm doesn't. Make sure your case has the appropriate case savers. These kits come with studs, nuts and washers. Torque 8mm studs at 18 ftlbs and the 10mm at 28 ftlbs.
Bug (Type 1): 1600
Bus (Type 2): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 211947511CGY
This is the switch that is on the left side of the dash pod on a bus 1955-1967.
Application:Part #: 113863113
These are the interior panels.
Application:Part #: 251407691A
Left Front bearing cap
Application:Part #: 021101487
Valve Cover Retaining Clip
Application:Part #: 111413401A
Top Shock Mounting Bolt
Application:Part #: 6801233
Billet Bracket for 3/16" Brake Line, for 1 1/2" Tubing
Application:Part #: 113707391WW
Bumper Support
Application:Part #: 1105182C
82 C/W Crank w/ Chevy Journals
Application:Part #: 1411107
2" Narrowed Leaves for Link Pin, 1 Set (2 sets required)
Application:Part #: 113857050A
These are the padded dashes that came on the 1968 and later Bugs.
Application:Part #: 111801041CX
Inner Rocker Panel Left
Application:Part #: 211411033E
Front torsion springs
Application:Part #: 1101442
This is a shim that is used between the head and barrel.
Application:Part #: 1129617
This air cleaner is a sealed unit; the top and bottom do not come off, but they're washable.
Application:Part #: 113837235AGY
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 1251161
A stinger (depending on your motor combo) makes horsepower at 5K RPM and above.
Application:
If you are converting a single port engine to a dual port or if you have a brand new case; these are the head studs you're looking for.
