Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Yeah, yeah, we have all heard that joke.
Yeah, yeah, we have all heard that joke. This really is a type of pickup for the oil that sits lower in the case than a stock pickup. If you are doing a lot of off-roading, we highly recommend this item. The only bad thing we can say about them is they don't have a drain plug. But the advantages out weigh that disadvantage.
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1117098
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117105ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1115457
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 113115193
This is the bolt that goes in the plate on the bottom of the motor.
Application:Part #: 1115450BC
Replacement Oil Cap Billet Polished
Application:Part #: 113115451D
Oil Filler with Tube
Application:Part #: 1117108ALF
These fittings are used for the stainless steel hose.
Application:Part #: 1117109B
Billett Oil Cooler Block Off
Application:Part #: 6115349
If you built your motor out of a type 3 case, you probably notice that once you got it all together you're missing a dipstick tube.
Application:Part #: 113115611
No, this isn't that distant cousin.
Application:Part #: 311115107AHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 111198029
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1115120
Melling Oil Pump for 8mm Studs with Flat Cam Gear
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1115450PL
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase.
Application:
Yeah, yeah, we have all heard that joke.
