Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Side Sliding Door Upper Roller and Bracket
Bus (Type 2); 68-79
This bracket holds the roller for the upper part of the sliding door. If you bracket is ok then you can just buy the roller. If your bracket is bad well here it is and it comes with a new roller.
No customer reviews for the moment.
Part #: 1101472
If you like clip on valve covers these are the best that we have seen.
Application:Part #: 141941175A
This chrome metal ring goes around the headlight.
Application:Part #: T1001002
Scissor Jack works on Bugs, Buses, and Ghias. Great for lowered cars
Application:Part #: 111837476A
The front door window rolls up and down between these two rubber seals.
Application:Part #: 151863012
These are the interior panels.
Application:Part #: 1711333BIL
Billet E-Brake Button
Application:Part #: 133955409
The arms extend from the shaft to hold the wiper blades, very rarely do they fail..
Application:Part #: 113301265E
These rubber mounts hold the transmission in place.
Application:Part #: 1129710
EMPI Single HPMX/IDF Manifold for Type 1 engines
Application:Part #: 113251163D
Tail pipes route the exhaust out of the back of the stock muffler..
Application:Part #: 113919051F
The sending unit registers the fuel level on the gauge.
Application:Part #: 211201075L
Fuel Tank For Carbureted Applications only. At this point in time we can not get this tank and we are using the 211201075M fuel injection take and just plugging off the return line.
Application:Part #: 111881285
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
Application:Part #: 113109623C
These springs return the valves back to their seats.
Application:Part #: 6945200
These chrome steel bolt-on covers go right over the existing lense to give your tail lights "billet" look protection..
Application:
Side Sliding Door Upper Roller and Bracket
