Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the last oil filter you will ever buy.
This is the last oil filter you will ever buy. The System One filter can be used on any motor or adapter that takes a spin on filter. It uses a stainless steel screen to filter the oil down to 60 microns. The high flow inlet will not restrict lubricant flow or contribute to a reduction of pressure. The die-cast aluminum housing is not only strong but also good looking. It's easy to clean, use soap or solvent. Tattle tale inspection, quick removal and easy to read filtration screen gives you an early warning of internal problems. High flow bypass maintains maximum efficiency to 5 microns before activation. One of the best purchases you will ever make.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1117698
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 113115451D
Oil Filler with Tube
Application:Part #: 1115610BK
Billet Dipstick, Black
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1117104
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 111115131B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 113198031
These gaskets are used on the sump plates of the engine.
Application:Part #: 1115181
A stock sump plate that has been chromed..
Application:Part #: 113115193
This is the bolt that goes in the plate on the bottom of the motor.
Application:Part #: 1115453
This stock oil filler and cap has been chromed.
Application:Part #: JC22210
Jaycee Billet Oil Cap with Breater #8 AN Fitting, Red
Application:Part #: 1115183BK
This plate is made out of a solid piece of aluminum. Black
Application:Part #: 1117104ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1115120
Melling Oil Pump for 8mm Studs with Flat Cam Gear
Application:Part #: 111115450
Vapor Baffle 25-36 HP
Application:Part #: 111115175B
This screen fits in the sump around the pick up tube.
Application:
This is the last oil filter you will ever buy.
