Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the front drums that the brake shoes ride on.
These are the front drums that the brake shoes ride on. Note: Don't over tighten the bearing nut, just snug it down against the bearing thrust washer. Now line up the handle of your wrench with one of the five lug nut holes and back the nut off so that the handle of the wrench lines up with the next hole. If your drums are four lug, then back the nut off just before the next hole. You do this to prevent the bearings from heating up and wearing away.
No customer reviews for the moment.
Part #: 113609205A
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes.
Application:Part #: 131609209
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes.
Application:Part #: 211611477A
This valve in the wheel cylinder allows you to bleed the brakes.
Application:Part #: 211611483
This valve in the wheel cylinder allows you to bleed the brakes.
Application:Part #: 113698293
This kit is for rebuilding the front wheel cylinder.
Application:Part #: 113611057B
This hydraulic slave cylinder is found in the front brake backing plate.
Application:Part #: 113609163
You will find this little plug in the backside of the rear backing plates on cars 1968 and later.
Application:Part #: 113698002
This kit has all the springs, pins and keepers for drum brakes.
Application:Part #: 131609237C
These four shoes or linings are in the front drums and are sold on an exchange basis.
Application:Part #: 131611057
Front Wheel Cylinder, Standard beetle only. 22.20mm. Will not fit Super Beetle
Application:Part #: 211703291
Clutch Pedal Return Buffer
Application:Part #: 211845121DCA
This seal goes around the front window.
Application:Part #: 1837188
If your original door lock pulls are broken or faded, these are very nice replacements.
Application:Part #: 111598051A
The rear axle seal kit comes with the necessary replacement gaskets, o-rings, washer and seal for the bearing cap.
Application:Part #: N14402140
Some of the most common studs you might need. Stud 8mm x 40mm
Application:Part #: 1601028CH
EMPI 8 Spoke Chrome, 4x130, 5.5"x15"
Application:Part #: 211405519
Kits contain the pins, bearings and shims which attach the spindle on king and link front ends to the axle beam.
Application:Part #: 113905451A
Ignition Cable Holder
Application:Part #: 221847219
This triangular plate is welded to your bus to allow you to screw in your pop-out window latch.
Application:Part #: 241853305
Window Aluminum Trim, Front Windshield, both halves
Application:Part #: 1119302CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 2881404CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 1845111AL
Bug Safari Glass to Frame Seal
Application:Part #: 211798005B
Splash Pan Install Kit
Application:Part #: 113117303
This stock oil cooler cools the hot oil coming from the engine.
Application:
These are the front drums that the brake shoes ride on.
