Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This kit allows you to run disc brakes in the rear.
This kit allows you to run disc brakes in the rear. We suggest you buy the front kit first, before you buy the rear kit. 70% of you braking comes from the front. This kit's a nice way to complement the front kit and it's a bolt-on application. If you have an off road car then you would only want rear disc brakes.
Bug (Type 1): 58-67
Type 3: 58-67
Ghia: 58-67
Race/Off-Road: 58-67
No customer reviews for the moment.
Part #: 1698152
This kit allows you to run disc brakes in the rear.
Application:Part #: 1615107
Replacement Rear Brake Bracket for Kit # 1615108
Application:Part #: 1615106
This kit allows you to run disc brakes in the rear.
Application:Part #: 1698152P
Premium Replacement pads for your aftermarket Disc Brakes.
Application:Part #: 6615103B
Rear Rotor for Disc brake setup, 4x130 bolt pattern, 14x1.5mm threads
Application:Part #: 1615125A
Right Rear Caliper 5/205 with Emergency Brake, Swing Axle
Application:Part #: 1615124A
Left Rear Caliper 5/205 with Emergency Brake, Swing Axle
Application:Part #: 211805031J
Front Nose Panel, complete with lower portion of winshield surround
Application:Part #: 1141025
Heavy Duty Clutch Pressure Plate - 1700lbs. This is made by KEP
Application:Part #: T1198101
This is a tool for checking deck height.
Application:Part #: 211801562Y
Rear Wheel Well Rear Repair Section, Right
Application:Part #: 1601058CAP
Replacement Center Cap for Rebel and Cosmo Rims including metal Retaining Clip
Application:Part #: 251407625
Front Wheel bearing
Application:Part #: 6301265
Putting a Bus IRS trans into your bug is the way to go, because it comes with a lower ring and pinion stock and is a stronger trans.
Application:Part #: 62010718E7
End Fill 10x24" Polished Stainless Steel Gas Tank
Application:Part #: 1198163
These rings are cast iron.
Application:Part #: 113611724B
These are the metal brake lines found throughout the car.
Application:Part #: 113919051F
The sending unit registers the fuel level on the gauge.
Application:Part #: 1107433
Not our favorite type of piston pin keeps.
Application:Part #: 1883408CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 113863311C
Black Tunnel Only Mat
Application:Part #: SR28XCO
This is what starts the car.
Application:
This kit allows you to run disc brakes in the rear.