Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This screen fits in the sump around the pick up tube.
This screen fits in the sump around the pick up tube. It's more of a rock catcher than anything else. We recommend an external filter in conjunction with the screen. Used screens are fine as long as they are clean.
Bus (Type 2): 72-79
Vanagon: 80-83
No customer reviews for the moment.
Part #: 1117699
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 1117110
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:Part #: 1115610BL
Billet Dipstick, Blue
Application:Part #: 1117099
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 070115311
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: JC21020
Jaycee Mag-Plate, 6 Bolt, Black
Application:Part #: 1115107FF
30mm Oil pump for Dual Relief & Flat cam Full Flowed Engines
Application:Part #: 1115106
A great way to increase the oil capacity of your engine is to bolt on a deep sump.
Application:Part #: 1117023FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:Part #: 021101269A
Oil Sump Lid O-Ring
Application:Part #: N110062
Some of the more common nuts you might need..
Application:Part #: 113198031
These gaskets are used on the sump plates of the engine.
Application:Part #: 111115107AKS
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1117107
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 021198031
These gaskets are used on the sump plates of the engine.
Application:Part #: 113117303
This stock oil cooler cools the hot oil coming from the engine.
Application:
This screen fits in the sump around the pick up tube.