Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:The aftermarket shifters listed here, shorten the shift pattern considerably.
The aftermarket shifters listed here, shorten the shift pattern considerably. This gives you a sensation of performance and it gets rid of that sloppy feel of the stock unit. All shifters have reverse lockout.
Bug (Type 1): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 211611723C
Brake Line, Left Front
Application:Part #: 111711305B
Emergency Brake Handle
Application:Part #: 211615107ACO
Front calipers hold the brake pads that stop the rotor, which in turn stops your vehicle.
Application:Part #: 1115107
This tray keeps the oil in the engine case from moving around too much, reducing oil starvation.
Application:Part #: 111698471
This kit comes with the o-rings and dust seals to repair your calipers.
Application:Part #: 211837235AGY
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 1601098
Chrome Valve Stems Set of 4
Application:Part #: 6905811
If you want a keyed ignition switch for you buggy or tube car, here you go.
Application:Part #: 113251053
40 HP Stale air Muffler
Application:Part #: 211827423
Engine Deck Lid Stay Roller (2 required)
Application:Part #: 111809131G
Front Bumper Mount, Left, Standard Beetle Only
Application:Part #: 6415812B
Tapered Chromoly Bung, mainly used for fabricating Tie Rods on Offroad/Race Applications. Thread 3/4"-16 RH
Application:Part #: 221883861A
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
Application:Part #: 111127511A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 021903655B
Boot for Alternator Cooling
Application: