Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the rear lenses for the tail light, brake light and turn signal light.
These are the rear lenses for the tail light, brake light and turn signal light. They are held in place with two to three Phillips screws.
Bug (Type 1): 62-67
No customer reviews for the moment.
Part #: 111945116
This seal goes between the tail light housing and the body of the car..
Application:Part #: 111945191E
This seal goes between the tail light housing and the body of the car..
Application:Part #: N141341
These are the rear lenses for the tail light, brake light and turn signal light. Set of 4 Screws for 62-67 Bug taillight lens and 68-72 Bus front turn signal lens to body
Application:Part #: 111945185
Taillight/Turn Signal Screw
Application:Part #: 111945263F
Taillight Bulb Holder, each
Application:Part #: W7AC
When replacing these use anti-seize on the threads. NGK B6HS is direct swap for this Bosch W7AC Plug
Application:Part #: 113853505F
This is the front strip that goes down the front hood.
Application:Part #: 111943191E
This is the lens and seal for the light that shines on the license plate.
Application:Part #: 6401061A
This beam is a weight saver on sand buggies.
Application:Part #: 113127025D
These stock pumps pump fuel into the carburetor.
Application:Part #: 141837475A
The front door window rolls up and down between these two rubber seals.
Application:Part #: W7CC
When replacing these use anti-seize on the threads.
Application:Part #: 111941341
This plug has three wires on it that plug into the headlamp.
Application:Part #: 151845121CCL
This seal goes around the front window.
Application:Part #: 039256092C
Heater Box T2 Right Non-CA
Application:Part #: 151947511A
Interior Light Switch
Application:Part #: 1129039E
Empi Dual 40mm Carburetor complete setup
Application:Part #: 1198035C
Chromoly 8mm Head Stud Kit
Application:Part #: 3251006
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 30091
This little box tells the generator what to do.
Application:Part #: 113847131BWH
This is the welt that goes around the rear popout windows.
Application:
These are the rear lenses for the tail light, brake light and turn signal light.