Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The rear wheel attaches to the rear brake drum.
The rear wheel attaches to the rear brake drum. Make sure you torque the axle nut to 250 ft. lb., we don't want any wheels falling off. We suggest you drive the Bug for a day and tighten the nut again. For some reason the nut seems to loosen up the first time. Always use a cotter pin to lock the nut. If the hole doesn't line up, tighten it a little bit more until it does. Never, ever back the nut off to line up the hole.
Bus (Type 2): 55-62
No customer reviews for the moment.
Part #: 211609209
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes.
Application:Part #: 113609205A
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes.
Application:Part #: 211609209A
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes.
Application:Part #: 211611477A
This valve in the wheel cylinder allows you to bleed the brakes.
Application:Part #: 211611483
This valve in the wheel cylinder allows you to bleed the brakes.
Application:Part #: 211698291
This kit is for rebuilding the wheel cylinder.
Application:Part #: 211611047C
This hydraulic slave cylinder is found in the rear brake backing plate.
Application:Part #: 211609537B
These shoes or linings are in the rear drums and are new, so no exchange.
Application:Part #: 211698003
Brake Spring Kit, Rear, includes both sides, 8 pieces total
Application:Part #: 141863706
This is a full carpet kit.
Application:Part #: 111821707BTQ
This is the beading that goes between the fender and the body.
Application:Part #: 6801241
Billet Universal Mount for 1 3/4" Tubing
Application:Part #: 1251261
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 113301265E
These rubber mounts hold the transmission in place.
Application:Part #: 211845521CAM
This seal is for the rear window.
Application:Part #: 1823319
These replace the stock front hood spring with a gas charged strut.
Application:Part #: 022109451
This screw rides against your valve, opening and closing it.
Application:Part #: 2615107AWW
Front Disc Brake Kit
Application:Part #: 1129710
EMPI Single HPMX/IDF Manifold for Type 1 engines
Application:Part #: 111511255C
Spring Plate Covers, Pair
Application:Part #: 133807305A
This is what gets smashed up first in an accident.
Application:Part #: 113415315
The main reason to replace these clamps is because you've destroyed the old ones getting them off.
Application:Part #: 113198031
These gaskets are used on the sump plates of the engine.
Application:Part #: 141857513A
Fender Mount Mirror, Left or Right
Application:Part #: 113251265
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:
The rear wheel attaches to the rear brake drum.
