Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
ECP part numbers are for the regular crimp style electrical ends.
ECP part numbers are for the regular crimp style electrical ends. ECX part numbers are the factory style ends. You will need a special pair of pliers (see ELECTRICAL END PLIERS in TOOL SECTION) to install ECX ends. The ECX are better than the regular crimp ends.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 2101303
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 113853505G
This is the front strip that goes down the front hood.
Application:Part #: 2251005
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 141871371
These pins position the top into the front windshield post..
Application:Part #: 113819635A
These are the vents that clip into the dash.
Application:Part #: 111251261B
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 113105219
Crankshaft Spacer Ring
Application:Part #: 113863709
This is a full carpet kit.
Application:Part #: 1601048
Fuchs Chrome, 5x205, 15x4.5"
Application:Part #: 1105401B
These connecting rods are longer than stock.
Application:Part #: 6B03010BK
These boots are made to keep water and dirt out of distributor and coil.
Application:Part #: 311405361B
These joints are located in the ends of the control arms.
Application:Part #: 1707135APL
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 2847105ASS
New replacement pop out window frames in Stainless Steel
Application:Part #: 133412345
Strut Mount, Front
Application:
ECP part numbers are for the regular crimp style electrical ends.
