Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This bushing is made to mate mismatched bellhousing and starter combinations.
This bushing is made to mate mismatched bellhousing and starter combinations. When installing, be careful not to mushroom the inner diameter.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 111119270B
This is a hub that is keyed onto the generator or alternator to mount the fan.
Application:Part #: 211903183
This is the bell shaped spacer that hold the outer half of the generator pulley on.
Application:Part #: SR17X
This is what starts the car.
Application:Part #: 111903137E
This is the belt that turns the generator.
Application:Part #: 1119031BHD
Motors with high horsepower and motors that rev fast run the risk of exploding a stock fan.
Application:Part #: 113903141B
The generator strap goes around the generator and holds the generator to the stand..
Application:Part #: 113119031B
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: SR11X
This is what starts the car.
Application:Part #: JC86030
Jaycee Billet Alternator Pulley, Silver
Application:Part #: 1903183
This aftermarket chrome cap nut and spacer hold the alternator/generator pulley on.
Application:Part #: 1903109BORD
Billet Pulley Outer Half Red
Application:Part #: GR11XCO
Generators supply the battery with voltage.
Application:Part #: 1903109BL
Billet Alt/Gen Pulley Blue
Application:Part #: 111903181
Generator Pulley Nut
Application:Part #: 1903109CH
This is a stock generator pulley that has been chromed.
Application:Part #: 1903141
This chrome strap holds the alternator or generator to the stand.
Application:
This bushing is made to mate mismatched bellhousing and starter combinations.