Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is almost a must for Super Beetles.
This is almost a must for Super Beetles. These bushings are made out of urethane, so they will last a lot longer. You'll have to take them to a machine shop to press the old bushings out of the central arm, but the new ones can be driven in with a rubber mallet.
Bug (Type 1): 71-73
No customer reviews for the moment.
Part #: 186360411
These ride on the tunnel from the shifter forward.
Application:Part #: 1070274BRK
Replacement Brackets for Roof Rack #1070274K
Application:Part #: 211611069CGR
Front Left Wheel Cylinder (2 Required) 25mm GERMANY
Application:Part #: 2251007
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 113853355A
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: 151871359C
These strips screw to the top.
Application:Part #: 1863515B
This plastic cover under the front hood, covers up all the wiring.
Application:Part #: N0123191
Circlip IRS Rear inner Wheel Bearing Housing (1 per side) 2 per car
Application:Part #: 1117106ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1105297
This washer is larger in diameter than stock so it gives you more surface coverage over the dowel pins.
Application:Part #: 211721629
Pivot Pin for Accelerator Pedal Hinge
Application:Part #: 111857561WH
These clips hold the sunvisor up.
Application:Part #: 3129614
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 211611070C
This hydraulic slave cylinder is found in the front brake backing plate.
Application:Part #: 133807425
This is the strip of rubber that goes on the center of the bumper..
Application:
This is almost a must for Super Beetles.