Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These fittings are used for the stainless steel hose.
These fittings are used for the stainless steel hose. Keep in mind there will be two fittings per connection. On the pipe thread end use teflon tape and don't "muscle" them. Turn them as tight as you can by hand, then one more full turn with a wrench.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1115465
This air filter is made to protect the crankcase.
Application:Part #: 1115456
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1117023
Mesa coolers are the state of the art oil coolers.
Application:Part #: 1115457BL
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Blue
Application:Part #: 1117098
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117012
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: N110623
Some of the more common nuts you might need..
Application:Part #: 1115452
This stock oil filler and cap has been chromed.
Application:Part #: 111115450
Vapor Baffle 25-36 HP
Application:Part #: 1119031
Replacement fan
Application:Part #: 1117101
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117103
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 021115311
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 1117106
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115421
These stronger springs were designed to boost the oil pressure in your motor.
Application:Part #: 1115140
This plug is used for plugging the outlet passage on an oil pump when full flowing oil pump. 1/4 NPT
Application:
These fittings are used for the stainless steel hose.
