Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber. These don't normally need to be replaced unless they have been ground too far or too many times. On stainless steel valves, make sure you grind the keepers so that they don't touch each other when they're put in place. Stainless steel valves are soft and if you don't grind the keepers they will eventually pull through.
Bus (Type 2): 76-79
No customer reviews for the moment.
Part #: 113101219
It's possible to put a generator on an alternator stand but not the other way around.
Application:Part #: 6415811A
Tapered Chromoly Bung, mainly used for fabricating Tie Rods on Offroad/Race Applications. Thread 3/4"-16 LH
Application:Part #: 111405641A
These are the inner bearing seals on the drums or rotors.
Application:Part #: 261847231
This is the wiper holder that mounts in the middle of buses that have safari windows.
Application:Part #: 071251185A
Tail pipes route the exhaust out of the back of the stock muffler..
Application:Part #: 111415603
Upper Column Bracket to Body Rubber Grommet
Application:Part #: 111711501A
Choke Cable w/Sleeve and knurled nut
Application:Part #: 111837298
Striker Plate Screw
Application:Part #: 6721356B
Slave Cylinder Trans Bracket Billet
Application:Part #: 211863112
These are the interior panels.
Application:Part #: 1611750A
These stainless steel braided flex lines don't swell like the original rubber hoses and they make the undercarriage look a lot nicer.
Application:Part #: 141853547B
These are the clips that hold the various chrome moldings on.
Application:Part #: 113951531F
This is the ring that is normally broken on your steering wheel.
Application:Part #: 211837206
These are the front door handles.
Application:Part #: 211611711A
Front Brake Line, Front Left
Application:Part #: 151863402
This is a full carpet kit.
Application:
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.