Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber. These don't normally need to be replaced unless they have been ground too far or too many times. On stainless steel valves, make sure you grind the keepers so that they don't touch each other when they're put in place. Stainless steel valves are soft and if you don't grind the keepers they will eventually pull through.
Bug (Type 1): 61-65
Bus (Type 2): 60-65
Ghia: 61-65
No customer reviews for the moment.
Part #: 251419811
These are the ball joints on the tie rods.
Application:Part #: 113129901
This is the tube that goes through the fan shroud that the accelerator cable threads through.
Application:Part #: 211405371AWG
These are reconditioned arms with new ball joints pressed in. They are sold on an exchange basis. If you would like to order these before sending your old arms in, please add part number 211405371WGC to your order. That is the core charge. Once you send back your old arms we will refund that amount, providing your arms are good.
Application:Part #: 1601057
Empi Corsa, Gun Metal Grey w/ Polished Lip, 5x205, 15x5.5"
Application:Part #: 1955113
This is used to drop the voltage on wiper motors when changing the car from 6v to 12v.
Application:Part #: 1127022BK
Billet Fuel Pump Block off, Black
Application:Part #: 211201557A
Cork Gas Cap Gasket, fits 60mm fuel caps
Application:Part #: 152823509B
The hood catch is what the pin of the hood latch goes into.
Application:Part #: 211707136B
These brackets hold the bumpers on.
Application:Part #: 111881375
This is the padding that sits on top of the springs of the seat. DOES NOT COME WITH HEADREST. See part number 111881375H for head rest.
Application:Part #: 141881717
These are covers for the seat headrests.
Application:Part #: 021129707D
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 211837379
Door Window Division Bar
Application:Part #: 151853901
Karmann Kabriolett Badge
Application:Part #: N140851
Sunroof Cable Channel and Center Guide Screw Set (10 screws)
Application:Part #: 111837501FMP
Window Regulator, Left (EMPI)
Application:
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.