Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The clutch cable boot goes over the end of the bowden tube where the cable moves in and out.
The clutch cable boot goes over the end of the bowden tube where the cable moves in and out. It's purpose is to keep dirt out of the tube. The boot is a real pain to put on; the only thing that makes it easier is a drop of oil in the end of the tube.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Off-Road: All
No customer reviews for the moment.
Part #: 111698003
This kit has all the springs, pins and keepers for drum brakes.
Application:Part #: 133053313
Trim Plate, Radio To Dash
Application:Part #: 221847131A
Seals the side popout windows on buses up to 1967.
Application:Part #: 211945161
Front Side Reflector Base
Application:Part #: 211501249
This large soft plug is on the back side of reduction boxes with the 46mm axle nut.
Application:Part #: 6611195A
Large Boot For Square Master Cylinder
Application:Part #: 211609209
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes.
Application:Part #: 1101473OR
These covers look good but have a tendency to leak.
Part #: 021119245
This boot joins the dip stick tubes on a 72-79 bus and is a real common place for leaks.
Application:Part #: 021256205K
These control boxes on 72-79 Buses and 75-79 Super Beetles, let the heat into the car.
Application:Part #: 111821531ATN
Tan Running Board Material, Left
Application:Part #: 6601154
These caps are made to dress up your wheels..
Application:Part #: 241853571
This molding was originally equipped on deluxe buses on the lower rocker panels.
Application:Part #: 211707335C
Bumper Bracket, Left, Rear
Application:Part #: 1401061A
2" Narrowed Beam with Ratchet Style Adjusters, Link Pin
Application:Part #: 1117698
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:
The clutch cable boot goes over the end of the bowden tube where the cable moves in and out.
