Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This nut goes on the inner side of the lower axle shaft of your large nut (46mm) recution boxes.
This nut goes on the inner side of the lower axle shaft of your large nut (46mm) recution boxes. You will need to remove the soft plug to get to this nut. Buy removing the nut you can take the lower axle out of the bearing. Make sure after you torque the nut the you pean the ring of the nut into the axle or it will come loose.
No customer reviews for the moment.
Part #: 6251000
These systems work well with a single carb set up as they have provisions for the heat riser.
Application:Part #: 211415669BP
Replacement Black Horn Button
Application:Part #: 113863505B
This is the replacement cardboard liner for under the front hood.
Application:Part #: 6941045
This is the headlight bucket you use in a fiberglass fender of a Baja Bug.
Application:Part #: 2101302
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 111941543G
Cap for headlight knob
Application:Part #: 1117005
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: 315953161D
These are the lenses that go over the front turn signal bulb holders.
Application:Part #: 241857635
Coat Hook, Deluxe Bus, Anodized Aluminum finish
Application:Part #: 113941541IV
These are the knobs for the wiper and light switches on the dash.
Application:Part #: 1129804
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1415802
This is a great way to dress up the front end of your car.
Application:Part #: 113853559
These are the clips that hold the various chrome moldings on.
Application:
This nut goes on the inner side of the lower axle shaft of your large nut (46mm) recution boxes.