Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This valve in the wheel cylinder allows you to bleed the brakes.
This valve in the wheel cylinder allows you to bleed the brakes. If the bleeder valve has broken off, we've found it's easier to replace the whole wheel cylinder because you usually ruin the cylinder before you get the valve out. 10mm
No customer reviews for the moment.
Part #: 213707155A
Front Bumper Guard
Application:Part #: 221885595
This is the bracket that screws to the rear seat then screws to the body
Application:Part #: 211201131D
Fuel Filler Retaining Ring
Application:Part #: 211405631
Front Bearing Spacer (1 per side)
Application:Part #: 311721335
This cable pulls the arm that releases the clutch.
Application:Part #: 111998162B
The wiper arms are connected to these shafts.
Application:Part #: 2847104CU
This makes the rear window pop out like the front windows.
Application:Part #: 131405641A
These are the inner bearing seals on the drums or rotors.
Application:Part #: 151701061B
Floor Plate, Left, Convertible only
Application:Part #: 311611701B
This flex hose goes from the metal brake line to the front wheel cylinder. m/f 335mm
Application:Part #: 1511228
This cap goes over the torsion bar end of the spring plate holding the grommet.
Application:Part #: 113141701F
This shaft holds the throw-out bearing in place.
Application:Part #: 211841771
Cargo Door Striker Plate
Application:Part #: 1601160A
VW Smoothie Hubcap, fits 4 Lug Wheels
Application:Part #: 1251000
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: N177512
These are some of the fuses and bulbs that you might need.
Application:
This valve in the wheel cylinder allows you to bleed the brakes.