Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts. On buses 1968-1979 we highly recomend this plate. The nose cone of your transaxle will have to be removed to install this plate.
Bus (Type 2): 68-79
Race/Off-Road: All
No customer reviews for the moment.
Part #: 113311123A
This is the main culprit of a noisy transmission.
Application:Part #: 211711169
Shift Rod Coupler, connects front to rear shift rods
Application:Part #: 211301289A
Nose Cone Boot
Application:Part #: 113301185A
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 091301189A
Transmission to drive flange seal. Left or right
Application:Part #: 091311123
This is the main culprit of a noisy transmission.
Application:Part #: 211301215
This is the front of the transmission that houses the shift lever.
Application:Part #: 111301255A
Transmission Cradle Mount Bracket
Application:Part #: 211501273A
This gasket goes between the reduction box halves.
Application:Part #: 111301207
Nose Cone Bushing, Front or Rear, Early
Application:Part #: 211599227
Front Transmission Axle Mount
Application:Part #: 1517120
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
Application:Part #: 211301265AFA
Transmission mount, front, mid
Application:Part #: 1311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:Part #: 111398003
Transmission gasket set.
Application:Bug (Type 1); -60
Bus (Type 2); -59
Ghia; -60
Part #: 6501141
These retainers help stiffen the plates that bolts the tubes to the trans.
Application:
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.