Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This kit allows you to shorten your clutch cable.
This kit allows you to shorten your clutch cable. Cut your cable and thread it though the post, then run a nut over the cable and tighten it.
Race/Off-Road: All
No customer reviews for the moment.
Part #: 111881213
These bushings on the seat track keep the seats from rocking and rolling.To install, remove your seat and clip the new bushings on.
Application:Part #: 211953513F
This switch tells the flasher which way to send the current.
Application:Part #: 111837421
Clip, holds rear metal felt run channel in place (2 required per car)
Application:Part #: N115317
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 143863705
This is a full carpet kit.
Application:Part #: 021131617G
This is a smog device.
Application:Part #: 111837501F
This is the mechanism that makes the window go up and down.
Application:Part #: 6601201
Aluminum Hub 5x205 for VW Spindle Mount Wheels
Application:Part #: 1601054
Empi Dish, Silver, 4x130, 5.5"x15"
Application:Part #: 241853341
Angled Window Molding Clip
Application:Part #: 6501149100B
These boots and flanges are designed for axles with very long suspension travel.
Application:Part #: 6857634
Clamp on Billet Grab Handle for 1 1/2" Tubing, Angled Mount
Application:Part #: 261829577
These rubber buffers go on the gates and body of single and double cab Buses to prevent the gates from banging into the body.
Application:Part #: 117867501
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 1905451RD
This is a good way to keep your spark plug wires separated.
Application:
This kit allows you to shorten your clutch cable.