Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This steel ball replaces the factory plastic one in Bus trannies 1968-1979.
This steel ball replaces the factory plastic one in Bus trannies 1968-1979. It does require you to take the nose cone off your transaxle.
Bus (Type 2): 68-79
Race/Off-Road: 68-79
No customer reviews for the moment.
Part #: 2301265
This steel conversion mount enables you to install a later style full syncro trans in your 1959 and earlier model Bus or Truck..
Application:Part #: 113301229A
This is the front of the transmission that houses the shift lever.
Application:Part #: 113311123A
This is the main culprit of a noisy transmission.
Application:Part #: 002301189C
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 113301155
This is the bushing between the bellhousing of the transmission and the starter.
Application:Part #: 2301149
Replacement Rubber mounts for Bus mid mount
Application:Bus (Type 2); 56-67
Part #: 113301263FA
Rear Transmission Mount, Left or Right good quality sold each
Application:Part #: 214711171
Rear Shift Rod, Connects front shift rod to transmission
Application:Part #: 2311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:Part #: 1517120
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
Application:Part #: 2301150
This is a bolt on kit that reduces torsional stress felt at the front of the nose cone mount and rotational stress on the bell housing mounts.
Application:Bus (Type 2); 56-67
Part #: 002517289A
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 113301263
These rubber mounts hold the transmission in place.
Application:Part #: 113398209
Bushings and a seal for the nose cone.
Application:
This steel ball replaces the factory plastic one in Bus trannies 1968-1979.
