Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The Intake Manifold Gasket (2 are required per engine).
The Intake Manifold Gasket is a thick layered gasket with a paper gasket on either side of a plastic spacer. The intake manifold gaskets are sold individually (2 are required per engine).
No customer reviews for the moment.
Part #: 113405615DGR
These are the front drums that the brake shoes ride on.
Application:Part #: 141941191
This seal goes in the headlight buckets.
Application:Part #: 211837211C
This seal goes between the handle and the body.
Application:Part #: N111531
Valve Adjusting Nut 9mm
Application:Part #: 113129905
This is the tube that goes through the fan shroud that the accelerator cable threads through.
Application:Part #: 021101457
These nuts and washers hold the heads on.
Application:Part #: 6611797
Universal Bleeder Valve, 1/8" NPT, Pair
Application:Part #: 191611349A
This cap sits on the top of the brake fluid reservoir filler hole.
Application:Part #: 112863401
These carpet kits are to be used with the original rubber floor mats.
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 113101353ECO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 113919051F
The sending unit registers the fuel level on the gauge.
Application:Part #: 113109623C
These springs return the valves back to their seats.
Application:Part #: GR15XCO
Core Charge Generators supply the battery with voltage. Rebuilt
Application:Part #: 111863121
These are the interior panels.
Application:Part #: 261809042BX
Right Side Panel with Storage Compartment on Right hand Side
Application:
The Intake Manifold Gasket (2 are required per engine).