Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the vinyl covering for the inside roof and sides of the Bug.
This is the vinyl covering for the inside roof and sides of the Bug. We suggest you take it to a professional for installation. The headliner installation is a difficult job and it takes a heat gun to get the wrinkles out. The part numbers are just the basic numbers. We will need to know the color and type of material you want. Please call for pricing. Brought to you proudly by TMI.
Bug (Type 1): 72
No customer reviews for the moment.
Part #: 361845321ACL
These are the seals for the side of a Type 3.
Application:Part #: 071251185A
Tail pipes route the exhaust out of the back of the stock muffler..
Application:Part #: 113955243A
WIPER SHAFT NUT, outer (nickel plated), fits all Beetles through 1969, each
Application:Part #: 1883406CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 6115466
This is the best breather system for off-road cars.
Application:Part #: 113109021DBR
We've had no luck with regrinds, therefore we sell only new camshafts.
Application:Part #: 211119515
Front Engine Tin with Doghouse Cooler
Application:Part #: 71016
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: 651300414
Suspension Limit Straps 14", Pair
Application:Part #: 1707135BBK
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 111198057A
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 6401023B
These clamps are made to go around your front axle beam and are used when building rail cars or stiffening up the front head of a baja Bug..
Application:Part #: 113701293C
This boot goes in the pan to encase the throttle and clutch tubes that come out of the pan.
Application:Part #: 1615104
Front Disc Brake Kit, Ball Joint, Double drilled 5x130 w/14x1.5mm threads or 5x4.75" with 12mm threads
Application:Part #: 211611313G
This reservoir is for a 68-72 Bus. The reservoir holds the brake fluid for the brake master cylinder.
Application:
This is the vinyl covering for the inside roof and sides of the Bug.
