Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Clutch & Throttle Tube Boot
RUBBER BOOT, seals choke, accelerator and clutch cables as they exit through the chassis. Fits through 1958 Beetle (1958 Beetle through chassis # 1862187)
Bug (Type 1): -58
Ghia: -58
No customer reviews for the moment.
Part #: 211843740A
Sliding Door lock
Application:Bus (Type 2); 68-79
Part #: 1615101B
This kit allows you to bolt disc brakes onto your Bug king and link pin or ball joint front end.
Application:Part #: 1847100KWG
This Bug Safari window is constructed as a dual-channel, steel frame that accepts 3/16" safety glass and an outer lip seal. The basic "Assemble-At-Home". The raw steel option is for those who want to completely customize their window frame.
Application:Part #: 1251161
A stinger (depending on your motor combo) makes horsepower at 5K RPM and above.
Application:Part #: 261829551
These new hinges replace your old worn out or frozen hinges.
Application:Part #: 113415670
Horn Button Kit
Application:Part #: 113857511
This is the mirrior you look at to see how fast that mack truck is coming up on you.
Application:Part #: T1129025
This meter is used for synchronizing your dual carburetors.
Application:Part #: 1411297AHD
Have you ever fought the stock sway bar clamps? If you're replacing a sway bar, you might think about these clamps because they're much easier to put on.
Application:Part #: 6501205
20 1/4" Axles for Type 2 trans with 930 joints Pair
Application:Part #: 039101061D
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 113845321AAM
This seal goes around the side window that is stationary (does not have a frame).
Application:Part #: 111885403
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 1251202D
This is the 3-bolt gasket that goes between the muffler and the header.
Application:Part #: 111298101A
This kit contains a barrel bolt and bracket that hook to the control levers.
Application:Part #: 113863708
This is a full carpet kit.
Application:
Clutch & Throttle Tube Boot