Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
2 1/16" Oil Pressure gauge, with sending unit. NOW AVAILABLE. The sending unit has two poles. One for the gauge and one for the OEM idiot light.
This is our own line of gauges. We tried our best to get them to look like the OEM gauges so they will all match. I am a big proponent of having three gauges in the car. Tach, oil press and oil temp. This way you know your getting in trouble before your in trouble. On the oil pressure this goes hand and hand with the oil temp gauge. As your oil temp goes up you will see the oil pressure go down. The trick here is to find the RPMs the motor is happy with cruising where the oil pressure stays up and the oil temp stays down. Every motor is different. The range i find is between 3200 and 3800.
No customer reviews for the moment.
Part #: VDO240855
This T-adapter is needed to hook up the oil pressure and oil temperature gauges.
Application:Part #: WG333959
2 1/16" Tach. AVAILABLE NOW
Application:Part #: WG310012
2 1/16" Oil temp gauge with sending unit. AVAILABLE NOW.
Application:Part #: JC22230
Jaycee Billet Oil Cap with Breater -8 AN Fitting, Blue
Application:Part #: 1115351BIL
Filter Replacement for Billet System 1
Application:Part #: 111937035
Fuse Box, 8 Fuse Screw Terminals
Application:Part #: 025115629A
Oil Dipstick Tube
Application:Part #: 6863608
This is a console with two or three gauge holes (2 1/16").
Application:Part #: 311721361
This tube goes from the metal tube coming out of the tunnel to the bracket on the transmission.
Application:Part #: 151863705
This is a full carpet kit.
Application:Part #: 111941543G
Cap for headlight knob
Application:Part #: N120611
Clip, Secures Rear Metal Channel to Door
Application:Part #: 211698001
Metal Brake Line kit
Application:Part #: 1601032
Fuchs Gloss Black with Polished Lip & Spokes, 5x130 bolt pattern 6"x15"
Application:Part #: 1109641
If you are going to run dual springs we suggest you use these valve spring retainers as well.
Application:Part #: 6129650476BK
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Application:Part #: 111883409
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 113899115A
This is a little square pad that goes on the torsion housing where the body mounts.
Application:
2 1/16" Oil Pressure gauge, with sending unit. NOW AVAILABLE. The sending unit has two poles. One for the gauge and one for the OEM idiot light.