Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Locking Glove Box Latch w/keys
Locking Glove Box Latch w/keys
Bug (Type 1): 52-67
Type 3: 62-67
Ghia: 56-67
Offroad: 52-67
No customer reviews for the moment.
Part #: 281843336A
Side sliding door hinge
Application:Bus (Type 2); 68-79
Part #: 211857551ABK
These are the visors you pull down to keep the sun out of your eyes.
Application:Part #: 361827185A
Rear hatch Alignment Guide, attaches to body, 2 required
Application:Part #: 211953353
Windshield Wiper Linkage Balljoint
Application:Part #: 211805036A
Inner Nose Structure
Application:Part #: 211945119B
This is the lens that you see on the side of the bus in the front and the rear.
Application:Part #: 2847103SS
This makes the rear window pop out like the front windows.
Application:Part #: 211841821
Seals the side cargo doors on buses up to 1967.
Application:Part #: 211201255
This collar goes around the gas tank neck on buses 1955-1967.
Application:Part #: 411417325
Idler Arm Bushing
Application:Part #: 211501287
If a rear axle bearing is bad, you will have excessive play in the rear wheel.
Application:Part #: 113955541BBK
Wiper Switch Knob, includes Center Button
Application:Part #: 113853555C
These are the correct trim moldings for your running boards.
Application:Part #: 111198455
Main Bearings, 25-36 HP
Application:Part #: 6513030
These mounts are made to get more than one shock on the back or your car.
Application:
Locking Glove Box Latch w/keys