Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This pulley is a lot smaller than a stock pulley.
This pulley is a lot smaller than a stock pulley. It turns the generator pulley slower, in turn giving you more horsepower. By turning the generator pulley slower you are turning the fan slower, losing some of your cooling. If your engine is always turning high RPMs then you can get away with this pulley. If not then don't run it.
No customer reviews for the moment.
Part #: 113105251G
This pulley on the end of the crank turns the fan belt.
Application:Part #: 1105401PL5
Pauter Rods 5.500 Light weight set of 4 These are custom order Connecting rods we will need to know your Length, Pin size, and Journal size prior to ordering.
Application:Part #: JC86120
Jaycee Billet 5.25" Crank Pulley for Offroad Cars, Red
Application:Part #: 1105254BK
This is a crank pulley for an upright motor.
Application:Part #: 111105401EMP
New Connecting Rods, 13-1600cc, Set of 4
Application:Part #: 6105248
Replacement Seal and Collar for Bolt-in Sand Seal
Application:Part #: 311105431A
Wrist Pin Bushing.
Application:Bug (Type 1); 1300-1600
Bus (Type 2); 1300-1600
Type 3; 1300-1600
KG; 1300-1600
Thing: 1300-1600
Offroad/Race; 1300-1600
Part #: JC86140
Jaycee Billet 5.25" Crank Pulley for Offroad Cars, Blue
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 113105241A
This is a large concave washer that goes on the crank after you have the nose bearing on.
Application:Part #: 1105721
Chevy Rod Bearings .010
Application:Part #: 111105259
The bolt and washer that holds the crankshaft pulley on.
Application:Part #: 1105401AC
These connecting rods are longer than stock.
Application:Part #: 113105277
These pins hold the flywheel in place on the crankshaft.
Application:Part #: 6105256BK
Sand Seal Pulley Kit, Includes Aluminum Collar and Orange Seal
Application:Part #: 113105231B
This gear matches up with the brass gear that is on the crank.
Application:
This pulley is a lot smaller than a stock pulley.
