Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Body Molding Kit
Body Molding Kit, for cars with hood crest, stainless steel 7 piece kit
Bug (Type 1): 1963 (from chassis # 5010448)-1966
No customer reviews for the moment.
Part #: 191611349A
This cap sits on the top of the brake fluid reservoir filler hole.
Application:Part #: 151863012
These are the interior panels.
Application:Part #: 211711630C
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:Part #: 2863620B
This handy basket hangs from the vent slots to allow you to finally have the cup holder you've always dreamed of. The front spring loaded pocket is a nice place to store your cell phone, or maybe to hold your registration for when the cops pull you over for going too slow. Available in black and white.
Application:Part #: 6601000AL
These aluminum wheels are great for sand cars, but we don't suggest using them on dirt cars.
Application:Part #: 1905532
This is a cheap knock off of the Compufire Electronic Ignition.
Application:Part #: N102174
This is a list of the most common bolts used on a car..
Application:Part #: 6945201A
These lights work well on off road cars. With Amber Lens
Application:Part #: 1405311
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard. These spindles will give you the stock ride and give you that lowered stance. They are sold on an exchange basis and come with new king pins and link pins. Ready for you to install. If you would like to order these before sending your old arms in, please add part...
Application:Part #: 2615107MAS
Type 2 Disc Brake Master Cylinder Conversion Kit
Application:Part #: 113881245B
Forward/Back Seat Adjustment Spring, Each
Application:Part #: 1115182
A stock sump plate that has been chromed..
Application:Part #: 1511223
Polished Stainless Steel Torsion End Plate, IRS, Pair
Application:Part #: 111813301L
Rear Apron
Application:
Body Molding Kit