Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
There are two types of keepers we like to use.
There are two types of keepers we like to use. One is a spiral lock keeper, which locks by overlapping itself. The other keeper is a Tru-Arc clip, which is a clip that has a aquare edge instead of a wire round edge. We highly recommend using either one of these keepers. It's cheap insurance against losing a clip and scarring your cylinder.
No customer reviews for the moment.
Part #: 1101386
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 113101355ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: N110085
Some of the more common nuts you might need..
Application:Part #: 1101468
If you have high compression you will need to vent the valve covers into a breather box.
Application:Part #: 1101344
36 HP Barrel Shims .040 (4)
Application:Part #: 1101372
40 HP Barrel Shims .020 (4)
Application:Part #: 1109512
Valve seats are used in the big valve heads.
Application:Part #: 111198157BBB
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1198160B
These rings are cast iron.
Application:Part #: 1198094BCH
94mm Pistons & Cylinders set with a 82mm Stroke CHINA
Application:Part #: 1101477
These covers look good but have a tendency to leak.
Application:Part #: 1101482EMP
This is the replacement mounting hardware kit for Channel Gasket Style Valve Covers.
Application:Part #: 043101457
These nuts and washers hold the heads on.
Application:Part #: 311198069MF
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers. MAHLE FORGED
Application:Part #: 1101355
Here's another long subject, but it'll give you a little something to think about.
Application:Part #: 1101475CH
These are just stock valve covers that are chrome.
Application:
There are two types of keepers we like to use.
