Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Stainless Steel Clamps Only, Link pin/ Ball Joint
Stainless Steel Clamps Only, Link pin/ Ball Joint
Bug (Type 1): All
Ghia: All
Offroad: All
No customer reviews for the moment.
Part #: 113129323B
Here are some of the replacement parts for your stock carburetor.
Application:Part #: 112950503IDF
Cupwasher for Idle Jet O-ring for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 111012900
A broken one can give bad reception and a coat hanger isn't much better.
Application:Part #: 2501102
This converts all 1967 and prior buses to independent rear suspension.
Application:Part #: 2415058
EMPI Polished Billet Aluminum Steering Wheel Boss Kit
Application:Part #: 113827906
License Plate Bracket, Rear
Application:Part #: 211945119B
This is the lens that you see on the side of the bus in the front and the rear.
Application:Part #: 211957905
Speedo Cable Grommet
Application:Part #: 133807225
This is the strip of rubber that goes on the center of the bumper..
Application:Part #: 6881409ABK
These seats are better than the fiberglass, but still no where near as good as beard seats.
Application:Part #: 6129651R
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Application:Part #: 1117014
Dry Sump Oil Filter Bracket with Pressure Relief by SCAT
Application:Part #: 04038
These are the parts found in the distributor.
Application:Part #: 211498211CWG
These spindles have reconditioned king pins and are ready to bolt back on. They do NOT come with link pins, so look at yours to see if you need new ones. Most of the time you do not need new ones as they are a bearing and not a bushing. Due to the core shortage on these spindles you will need to send us your old ones first.
Application:Part #: 111827329
Engine Deck Lid Spring CHROME
Application:Part #: 111201261
Fuel Breather Hose Clip
Application:
Stainless Steel Clamps Only, Link pin/ Ball Joint
