Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This boot goes on the tube that the shift rod runs through.
This boot goes on the tube that the shift rod runs through. It keeps water and dirt out of the bushings. To put the rear one on is not hard. You?ll have to remove the shift rod coupler, install the boot and put the coupler back on. The front one isn't hard either if the front shift rod coupler comes off. If you are having trouble with the front shift rod coupler please read FRONT SHIFT ROD COUPLER.
No customer reviews for the moment.
Part #: 1251261
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 113881177
Camber Detent Springs, Pair
Application:Part #: 1119026BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 211847439A
This seal is for factory safaris only.
Application:Part #: 211857527
These mirrors mount on the doors or door hinges so you can see what's behind you.
Application:Part #: 311129707
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 311501201D
USED Stock replacement long swing axles.
Application:Part #: JC91040
Jaycee Leak proof Pushrod Tubes, Silver
Application:Part #: 141971907
Grommet for High/Low Beam Wiring
Application:Part #: 6821305N
These kits are really thick and have a great fitting hood.
Application:Part #: 6501229AE
These are hardened aircraft quality CV joint bolts.
Application:Part #: 1251210
These are two of the different types of exhaust nuts.
Application:Part #: 113141701C
This shaft holds the throw-out bearing in place.
Application:Part #: 1119026CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 6415060B
This mount is used with the stock steering box.
Application:Part #: 113598101
New CV Axle Assembly
Application:
This boot goes on the tube that the shift rod runs through.
