Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are some of the most common jets used. Sold in pairs.
These are some of the most common jets used. We'll be happy to help you with your jetting, but we'll need to know some details. So before you call us, get some information ready about your engine, like size, compression ratio, etc. Sold in pairs.
No customer reviews for the moment.
Part #: 112920330
30mm Main Venturi for 40IDF or HPMX
Application:Bug (Type 1); IDF
Bus (Type 2); IDF
Type 3; IDF
KG; IDF
Thing; IDF
Off Road; IDF
Part #: 113129027HBR
Carburetor 30 Pict 1300-1600
Application:Part #: 1198578
This kit has the gaskets, o-rings, accelerator pump and needle and seat to rebuild an IDF carb.
Application:Part #: 113129391
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 1129306075
These are some of the most common jets used.
Application:Part #: 1129044
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1129040E
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 113129323C
Here are some of the replacement parts for your stock carburetor.
Application:Part #: 1129034
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 112950503IDF
Cupwasher for Idle Jet O-ring for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 111129493A
Steel Vacuum Line junction between Vacuum Advance and carburetor
Application:Part #: 1129039
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1129306050
These are some of the most common jets used.
Application:Part #: 1129505002
These are some of the most common jets used.
Application:Part #: 049129412C
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 1129033
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:
These are some of the most common jets used. Sold in pairs.