Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are some of the most common jets used. Sold in pairs.
These are some of the most common jets used. We'll be happy to help you with your jetting, but we'll need to know some details. So before you call us, get some information ready about your engine, like size, compression ratio, etc. Sold in pairs.
No customer reviews for the moment.
Part #: 1129304040
These are some of the most common jets used. Sold individually.
Application:Part #: 1129306050
These are some of the most common jets used.
Application:Part #: 112950505IDA
Stack Hold Down Tab
Application:Part #: 1129201200
These are some of the most common jets used.
Application:Part #: 1129040E
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 113129034KIT
This adapter is used when you want to put a 30PICT carb on a dual port manifold. Will only work with a round bowl style carb. It will NOT work with a square bowl carb.
Application:Part #: 1129510
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1129306075
These are some of the most common jets used.
Application:Part #: 113198575URP
This kit comes with the gaskets, the needle and seat, and accelerator pump diaphragm for the carburetor..
Application:Part #: 113129027
This is what delivers gas and air to the engine.
Application:Part #: 1198578
This kit has the gaskets, o-rings, accelerator pump and needle and seat to rebuild an IDF carb.
Application:Part #: 1129511B
Kadron Carburetor Linkage Ball Socket Ends, 10/32 Left & Right, Pair
Application:Part #: 1129040
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 113129027H
This is what delivers gas and air to the engine.
Application:Part #: 1129199150
Needle Valve for 40/44 HPMX (EMPI), 40-48 IDF (Weber) 1.50mm
Application:Part #: 1129034
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:
These are some of the most common jets used. Sold in pairs.