Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Drop Spindle 5x205 Front Disc Brake Kit
Drop Spindle 5x205 Front Disc Brake Kit includes spindles, calipers, pads, hoses, bearings, seals, and hardware. Requires 69-on Tie Rod Ends
Bug (Type 1): 66-77
Ghia: 66-74
No customer reviews for the moment.
Part #: 1698152R
Premium Front Brake Pads for Brake Kit # 1615101A
Application:Part #: 1615109A
Front Caliper Lowered, 5/205
Application:Part #: 1615109B
Front Caliper Lowered, 5/205
Application:Part #: 1698152D
Replacement pads for 1615109A and 1615109B
Application:Part #: 1615106D
Replacement Front Brake Rotor 5/205, 5/130 for Kit 1615100E
Application:Part #: 1863701
Front floor mats provide carpet protection..
Application:Part #: 113847079C
Pop Out Window Latch, Left
Application:Part #: 1953161
This bumper is perfect for 1968-73 cars when the turn signals have been shaved off the front fenders.
Application:Part #: 3251004
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: T1129025
This meter is used for synchronizing your dual carburetors.
Application:Part #: NGK D8EA
This Spark plug is only used for Racing or Competition vehicles due to the size of the Spark Plug; Dimensions Below Thread Pitch: 12mm x 1.25mm, Thread Length: 19mm (3/4") Verify that the Thread Pitch and length is compatible with your heads if you have any questions call and ask prior to ordering.
Application:Part #: 133411333
Super Beetle Sway Bar Clamp
Application:Bug (Type 1); SB 71-79
Part #: 1117108
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 111941115H
This glass cover goes over the headlight on bugs up to 1966 and on buses up to 1967.
Application:Part #: N0128101
These are some of the most common clips you will need when putting your car back together..
Application:Part #: 1903531
On all upright motor, this plastic cover goes over the top opening of the generator to keep dirt out.
Application:Part #: 151847341A
This seal goes between the rear quarter window and the front door side window on a convertible.This is very important if you want to keep your window in..
Application:Part #: 1119302CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 1198087
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 261881404
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 311721555C
This cable operates the carburetor(s).
Application:
Drop Spindle 5x205 Front Disc Brake Kit
