Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Rear Lower Corner, Right, 250mm (9.8") high
Rear Lower Corner, Right, 250mm (9.8") high
Bus (Type 2): 55-67
No customer reviews for the moment.
Part #: 221847105A
New replacement pop out window frames. Mild Steel
Application:Part #: 111953193
This seals the front turn signal housing from the fender.
Application:Part #: 2251010
Header Only, 1 1/2" tubing
Application:Part #: 131415802E
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 251807035R
Bumper Strip Retaining Clips (Set of 10)
Application:Part #: 211801401
Cargo Door Lock Rod Plate Reinforcement
Application:Part #: 261898003
Single Cab Ignition 2 locking front door handles and 2 keys
Application:Part #: 133821306
These are new rear fenders.
Application:Part #: 071256052
Heat Riser Elbow, Right
Application:Part #: 211953141J
These are the lenses that go over the front turn signal bulb holders.
Application:Part #: 2501102CO
CORE CHARGE
Application:Part #: 211711171B
Rear Shift Rod, Connects Shift Rod to Transmission
Application:Part #: 1847431
Bug Safari Weld in Tabs
Application:Part #: 113301264
These rubber mounts hold the transmission in place.
Application:Part #: 211012900
A broken one can give bad reception and a coat hanger isn't much better.
Application:Part #: 021101269A
Oil Sump Lid O-Ring
Application:
Rear Lower Corner, Right, 250mm (9.8") high
