Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Fuel Filter Square 7mm X 7mm
Fuel Filter Square 7mm X 7mm For All Fuel Injected Type 3s
Type 3: Fuel Injected
No customer reviews for the moment.
Part #: 113845521BCL
This seal is for the rear window.
Application:Part #: 1601103A
Screw in Wheel Studs M14-1.5 commonly found in 5x130 applications
Application:Part #: 021198481ABR
The crankshaft rides in the main bearing.
Application:Part #: 211801051IL
This area tends to rust.
Application:Part #: 111837625B
Vent wing seals on the front doors keep out the elements.
Application:Part #: 211809163BX
Rear Wheel Well Arch, Left
Application:Part #: 113863509C
Front Trunk Liner
Application:Part #: 6415811B
Tapered Chromoly Bung, mainly used for fabricating Tie Rods on Offroad/Race Applications. Thread 3/4"-16 LH
Application:Part #: 211841091
Lower replacement pieces for the side cargo doors.
Application:Part #: 211841081F
Cargo Door Skin, Lower Front to Waistline
Application:Part #: 1823565
This guard goes underneath the front hood handle to prevent your fingernails from scratching the paint..
Application:Part #: 143845212BR
These seals slide into a channel sealing the front door window glass on a Ghia.
Application:Part #: 6698110RT
Rebuild Kit for 3/4" Angled Turning Brake 7/8" clutch- 7/8" Brake master Cylinder
Application:Part #: 112950501IDF
Mixture Screw for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 1115457BL
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Blue
Application:Part #: 1903032CH
These are the three pieces of tin that go on the back of the generator or alternator.
Application:
Fuel Filter Square 7mm X 7mm