Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Dual Pedal Assembly with Throttle Pedal. Do not come with slave cylinder for clutch.
Dual Pedal Assembly with Throttle Pedal, 3/4" Clutch, 7/8" Brake, fitting size is 1/8" NPT for CABLE THROTTLE
No customer reviews for the moment.
Part #: 6721355RD
Clutch Slave cylinder billet
Application:Part #: 311971907
Turn Signal Switch Grommet for Type 1, fuel pump and backup harness grommet on late Type 2, and main harness through body early Type 2
Application:Part #: 2615107A
This kit allows you way to bolt on disc brakes to the front of your king and link pin front end. Bolt Pattern is 5x112
Application:Part #: 151837476D
The front door window rolls up and down between these two rubber seals.
Application:Part #: 02006
These are the parts found in the distributor.
Application:Part #: 211415669G
Replacement Gray Horn Button
Application:Part #: 1837249
Door stops are used with one piece-windows, they replace the check rod and stops that are removed for the installation of the windows.
Application:Part #: 113127025BCD
These stock pumps pump fuel into the carburetor.
Application:Part #: 141831712A
Front door seals keep out the wind, rain, dirt and noise.
Application:Part #: 211953519G
This switch controls the wiper motor.
Application:Part #: GR15NCH
Generators supply the battery with voltage. CHINA
Application:Part #: 1141701B
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 311415812C
These are the ball joints on the tie rods.
Application:Part #: 211809581
This is the most common place for rust on your bus.
Application:Part #: 6415616A
This unit is used when you want to take the steering wheel off in a hurry.
Application:Part #: 113847133A
These seals are for the side popout windows.
Application:Part #: 6711149
This box is made so you can weld it to a piece of 1 1/2" tubing and mount it to your shifter.
Application:
Dual Pedal Assembly with Throttle Pedal. Do not come with slave cylinder for clutch.
